Extension Boards & Sockets – Kudilinks https://www.kudilinks.com Your Link to Smart Savings! Tue, 06 May 2025 13:28:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://www.kudilinks.com/wp-content/uploads/2025/04/cropped-Add-a-heading-5-e1745946104535-1-32x32.png Extension Boards & Sockets – Kudilinks https://www.kudilinks.com 32 32 244695239 Tuya 3P4W WiFi Smart Meter New 3PN 100A Three-Phase Energy Meter https://www.kudilinks.com/product/tuya-3p4w-wifi-smart-meter-new-3pn-100a-three-phase-energy-meter/ Tue, 06 May 2025 12:59:40 +0000 https://www.kudilinks.com/?post_type=product&p=5403
1.Main Functions
a. Overvoltage protection, undervoltage protection, overload protection, undercurrent protection, delay protection Time protection, voltage imbalance protection, current imbalance protection, shortage Phase protection and phase sequence protection, each parameter can be set with action threshold and on/off.
b. The backlight display shows no action for 180 seconds, and the relay is disconnected with a red backlight, Normal white backlight. Press the up and down buttons to switch and display the voltage, current, and power of the three phases
Power factor, frequency.
2.Fault Records：
Record overvoltage, undervoltage, overload, low current protection, voltage imbalance,Current imbalance and phase sequence protection.Note: Graffiti App Record

3.WiFi lndicator Light Status:

1.Fast flashing indicates searching for WiFi signal

2.Slow flashing indicates WiFi offline status
3.Long light indicates that WiFi is connected

4.Instalation and Usage Conditions:

1.Working Temperature:-30°℃-70C 2.Working Humidity:≤85% 3. Working Altitude:Not Exceeding 2000m
4.Pollution Level:Level 3 5. Modular design appearance and din rail installation
6.Wiring Capacity:Insulated copper wire uner 35mm²

5.Notes:

1. Temperature: -20℃~60
2. Humidity: ≤85%
3. Altitude: not exceeding 2000m
4. Pollution level: Level 3
5.Modular design for exterior design and guide rail installation.
6. Wiring capacity: Insulated copper wire of 35 square millimeters and below.

Precautions:

1. This product has no isolation function. Please disconnect the front stage when repairing the circuit Circuit breaker switch.
2. The zero line (N line) of this product is directly connected without disconnection function.
3. The protector must be wired according to the markings and must not be connected incorrectly.
4. Although this product has limited current protection function, it cannot replace circuit breakers, Please install circuit breakers such as DZ47 and C65 at the front end of the line Short circuit protection.
5. Before use, please tighten the clamp screw to prevent poor contact and Damaged product.
Product images
]]> 5403